Snorkel SL30SL-sn50001+ User Manual download pdf (Page 18)

Page 14 Operation Manual

Maintenance

AINTENANCE

WARNING

Never perform service while the platform is elevated without first blocking the elevating assembly.

DO NOT stand in the elevating assembly area while deploying or storing the brace.

Figure 6: Scissor Brace

LOCKING

LEVATING

SSEMBLY

INSTALLATION

1. Park the work platform on firm, level ground and

leave the engine running.

2. Ensure the Chassis Emergency Stop Button is

twisted to the ON position.

3. Press and hold the Chassis LIFT and ENABLE

buttons to elevate the platform approximately

305 mm (12 inches).

4. Place a jackstand with a minimum rating of

1814 kg (4000 lbs.) between the lower mast and

chassis, just behind the front axle.

5. Press and hold the Chassis DESCEND and ENABLE buttons to lower the platform until jackstand is

secured tightly between lower mast and Chassis.

REMOVAL

1. Press and hold the Chassis LIFT and ENABLE buttons to elevate the platform until the jackstand can

be removed.

2. Remove jackstand.

3. Press and hold the Chassis DESCEND and ENABLE buttons to completely lower the platform.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 103 104

No comments

Snorkel SL30SL-sn50001+ User Manual Page 18