Snorkel TB66J User Manual Page 28
- Page / 84
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Chapter 6 – Controls
24 TB66J – 0083740
Note
Machine functions are not operational while using the
hydraulic warm-up system.
To warm-up the hydraulic uid from the lower controls:
1. Start the engine from the lower controls.
2. Place the hydraulic uid warm-up switch in the on
position.
The engine throttle speed will increase to warm
the hydraulic uid.
The engine throttle speed will decrease and return
to idle once the hydraulic uid reaches a preset
temperature.
If the warm-up switch is left on the engine speed
will continue to increase and decrease to keep the
hydraulic uid at a preset temperature.
3.
When the engine throttle speed returns to idle, place
the hydraulic uid warm-up switch in the off position.
Circuit Breaker Reset Buttons
The wiring box has a circuit breaker for the main and run
circuits. There is a reset button for each circuit breaker
on the front of the wiring box (refer to Figure 6.3).
Figure 6.3 – Wiring Box
The upper control panel has a circuit breaker for the
swing (turntable rotation), lift, drive and main control
circuits. The circuit breakers are on the front of the up-
per control panel (refer to Figure 6.4).
Figure 6.4 – Upper Control Panel Front
The electrical power outlet at the platform has a 15 amp
circuit breaker. The reset button is on the right side of
the electrical box (refer to Figure 6.5).
Figure 6.5 – Electrical Power Outlet
The circuit breakers protect the electrical wiring and
components from electrical overload in case of a short
circuit or other fault.
Caution
A tripped circuit breaker indicates a malfunction in
the electrical system. Component damage can result
if the cause of the malfunction is not corrected. Do
not operate the aerial platform if the circuit breaker
trips repeatedly.
Push the button to reset the circuit breaker.
Upper Controls
The upper controls (refer to Figure 6.6) are located on the
control panel at the platform. Boom, platform, and drive
functions can be operated from the upper controls.
Circuit Breaker Reset Buttons
Start Switch
Circuit Breaker Reset Buttons
Circuit Breaker Reset Button
- OPERATOR’S 1
- Table of Contents 3
- Chapter 8 – Operation 4
- Chapter 11 – Troubleshooting 4
- Chapter 1 – Introduction 5
- Maintenance 6
- Manual of Responsibilities 6
- Additional Information 6
- Chapter 3 – Specications 7
- Working Envelope 8
- General Specications 9
- Engine Specications 10
- Engine Oil Viscosity 12
- TB66J – 0083740 9 13
- Chapter 2 – Specications 14
- Chapter 3 – Safety 15
- Prestart Inspection 16
- Operation 16
- Electrical System 17
- Hydraulic System 17
- Tip-Over and Falling Hazards 17
- Placards and Decals 18
- Chapter 4 – Safety Devices 19
- Emergency Lowering Knob 20
- Ground Operation Switch 20
- Platform Foot Switch 20
- Guardrails 20
- Lanyard Anchors 20
- Tilt Alarm 21
- Engine Protection Systems 21
- Flashing Light 22
- Light Switch 22
- Engine Oil 24
- Hydraulic Fluid Filter Gauge 24
- Chapter 6 – Controls 25
- Circuit Breaker Reset Buttons 28
- Upper Controls 28
- Machine/Generator Switch 31
- Horn Button 32
- Operator’s Manual 33
- Fan Belt 34
- Air Intake 34
- Fuel Gauge 34
- TB66J – 0083740 31 35
- Cables and Wiring Harness 36
- Tires and Wheels 37
- Emergency Lowering 38
- Lower Control Station 38
- Level Sensor 39
- Sandblast Protection Kit 40
- Structures 40
- Upper Control Station 41
- Emergency 42
- Stop Button 42
- Engine/Emergency 42
- Power Switch 42
- Start Switch 42
- All Motion Alarm 43
- Air Line to Platform 43
- Platform Glazier Package 44
- Platform Control Cover 44
- Right Side 45
- WA R N IN G 46
- DO NOT RIDE IN PLATFORM 47
- WHILE UNIT IS BEING TOWED 47
- Left Side 48
- D A N G E R 49
- 46 TB66J – 0083740 50
- Prestart Inspection Checklist 51
- 48 TB66J – 0083740 52
- Preparing for Operation 54
- Lower Controls 54
- Four Wheel Drive 57
- Gradeability 57
- Percent of 58
- Angle of Slope 58
- Electrical Power Outlet 59
- AC Generator 59
- Dual Fuel 60
- Air Line 60
- Driving Lights 60
- Platform Work Lights 60
- Bump Guard System 61
- Transporting 63
- Tie-Down 64
- Disconnect Plate 64
- Lifting Lugs 65
- Shutoff Valve 66
- Emergency Power System 67
- 66 TB66J – 0083740 70
- 68 TB66J – 0083740 72
- TB66J – 0083740 69 73
- 70 TB66J – 0083740 74
- Bleeder Valve 75
- Fuel Filter 75
- Bleeder Pump 75
- Fuel Line 75
- Appendix A – Glossary 77
- Appendix A – Glossary 78
- Product Warranty 79
Related products and manuals for Special machinery Snorkel TB66J
Special machinery Snorkel TB85J User Manual
(76 pages)
(76 pages)
© 2020, manymanuals.com. All rights reserved. | 0.400 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals